High Torque Automation Electric Multi Turn Valve Actuator

High torque automation electric multi turn valve actuator

High torque automation electric multi turn valve actuator is applied in controlling various valves and other similar products, include butterfly valve, ball valve, gate valve, control valve and etc.With up to 51 terminals, enables direct access without the special wiring copper rings. Convenient and easier tor on-site installation. High torque automation electric multi turn valve actuator meets international standards and is designed with the aim of high reliability and long service life - trying to minimize maintenance requirements. AOX has its ownfactory.AOX implementers guarantee safe and reliable services under various extreme environmental conditions.

High torque automation electric multi turn valve actuator Introduction

High torque automation electric multi turn valve actuator is applied in controlling various valves and other similar products, include butterfly valve, ball valve, gate valve, control valve and etc.Double sealed structure of the wiring chamber. The internal electrical devices are guaranteed to be in a perfectly sealed protection when the actuator is performing on-site installation and debugging.AOX supply the best quality High torque automation electric multi turn valve actuator with high technology and high performance. AOX is asupplierto many large enterprises. We are committed to providing good service and support to all of our clients around the world.

High torque automation electric multi turn valve actuator Parameter (Specification)

High torque automation electric multi turn valve actuator Feature And Application

Torque Range: 40 - 1000 Nm Direct Output

Speed: 34 35 45 67 70 90 (rpm)

Explosion-proof level: Exd IIC T5 design

Connection size:ISO5210(Thrust torque type)and JB2920(Three claw type)

Working System:On-off Type: S2 15 min, no more than 600 times per hour start.

Modulating Type: S4 50 %, up to 600 triggers per hour

Dead Zone:≤2%

Time Lag:N/A

Limit and torque sensing

Absolute encoder precision detection valve position

Manual / automatic clutch switching

Local control inching / automatic holding selection

ESD beyond protection

Two-wire control protection

Three-phase power phase sequence protection

High torque automation electric multi turn valve actuator Details

1.Manual operation for High torque automation electric multi turn valve actuator

- In the commissioning or in an emergency the actuator can be operated by handwheel.

- By operating the red button to disconnected the actuator and motor and start manual operation.Because the self-locking worm gear between the motor and the operating shaft are separated, it’s very easy to turn to manual operation even if the actuator is running at maximum torque.

- After starting the motor, automatically breaks away from manual operation, when the motor is operating the hand wheel does not work.

2.Valve mounting standard

Installation flange of High torque automation electric multi turn valve actuator is according to EN ISO5210 or DIN3210 standard. Various types of output drive types to choose, suitable for different types of valves.

3.Motor protection.

In order to protect the motor against overheating, there are two series of thermal switch installed in the three-phase motor or single-phase motor winding inside. They are involved in the control circuit to prevent damage to the motor because of winding overheating.