AOX is a professional manufacturer from China that focuses on the manufacturing of electric actuators for more than 20 years. After years of research, AOX launched the "AOX-M" series three phase electric multi turn actuator. "AOX-M" series electric actuators are used to control a variety of valves and other similar products, such as butterfly valves, ball valves, gate valves, globe valves, control valves and other similar applications.
AOX is a professional manufacturer from China that focuses on the manufacturing of electric actuators for more than 20 years. After years of research, AOX launched the "AOX-M" series Three Phase Electric Multi Turn Actuator. "AOX-M" series electric actuators are used to control a variety of valves and other similar products, such as butterfly valves, ball valves, gate valves, globe valves, control valves and other similar applications.
The control circuit of "AOX-M" series Three Phase Electric Multi Turn Actuator conforms to the single-phase or three-phase power supply standard, and the circuit layout is compact and reasonable. The actuator adopts sunflower terminal with 29 connection ports. When double sealing connection is adopted, the terminal block is installed between the actuator cavity and the connector. It can protect the equipment from dust or moisture even when the outer cover is removed or the cable jacket is not completely sealed. The terminal blocks can effectively meet the requirements of various additional functions (can be processed separately according to customer requirements).
Model |
Output torque |
Speed |
Maxshaft diameter |
Power |
Rated current(A)50HZ |
Flange |
Weight |
three phases |
|||||||
N·m |
RPM |
mm |
W |
380V |
ISO5210 |
Kg |
|
AOX-M-007 |
70 |
45 |
Φ28 |
400 |
2.42 |
F10 |
32 |
70 |
90 |
400 |
2.95 |
||||
AOX-M-010 |
120 |
35 |
Φ28 |
600 |
2.25 |
F10 |
38 |
120 |
70 |
600 |
3.18 |
||||
120 |
105 |
800 |
5.15 |
||||
AOX-M-020 |
300 |
34 |
Φ40 |
1100 |
4.50 |
F14 |
68 |
300 |
67 |
1100 |
6.85 |
||||
AOX-M-050 |
450 |
34 |
Φ40 |
1100 |
9.58 |
F14 |
70 |
450 |
67 |
1500 |
14.80 |
||||
AOX-M-060 |
600 |
34 |
Φ55 |
3000 |
10.89 |
F16 |
103 |
600 |
67 |
4000 |
16.50 |
||||
AOX-M-080 |
800 |
34 |
Φ55 |
3000 |
12.43 |
F16 |
103 |
800 |
67 |
4000 |
23.50 |
||||
AOX-M-100 |
1000 |
34 |
Φ55 |
4000 |
30.20 |
F16 |
103 |
Torque Range: |
40 - 1000 Nm Direct Output |
Speed: |
34 35 45 67 70 90 (rpm) |
Anti-vibration Level: |
JB/T8219 |
Noise Level: |
Less than 75 dB within 1 m |
Modulating Type: |
S4 50 %, up to 600 triggers per hour |
Applicable Voltage: |
3 phase: AC 380 V (±10 %) /50/60 Hz (±5 %);optional: 1 phase AC 220 V |
Signal Feedback: |
Integrated fault contacts,Close the valve contact,Open the valve contact |
Output signal: |
4 - 20 mA; 0 - 10 V; 2 - 10 V |
Dead Zone: |
≤2% |
Time Lag: |
N/A |
Shell: |
Enclosure:IP67(IP68 optional),NEMA4 and 6 |
Power: |
Standard:380V AC/3ph Optional:110/220V AC/1ph,440V AC/3ph, 50/60Hz, ±10% |
Self-locking device: |
Self-locking by worm and worm gear |
Space heater: |
30W (110/220V AC) Condensation preventing (according to conditions, can be adjusted) |
Conduit entry: |
Double seal 3×(PT3/4”、PT1”、PT1-1/2”optional) |
Ambient temperature: |
-25℃~+70℃(-30℃、-40℃、-60℃optional) |
Setting mode: |
Non-intrusive setting (without opening the cover set type) |
Shell: |
Enclosure:IP67(IP68 optional),NEMA4 and 6 |
|
Power: |
Standard:380V AC/3ph Optional:110/220V AC/1ph,440V AC/3ph, 50/60Hz, ±10% |
|
Motor: |
Asynchronous motor |
|
Limit switch: |
1×Open/ Close, SPDT,250V AC 10A(on/off model) |
|
Auxiliary limit switch: |
1×Open/ Close, SPDT,250V AC 10A(on/off model) |
|
Torque switch: |
1×Open/ Close, SPDT,250V AC 10A |
|
Operating temperature: |
Internal-placed thermal protection,Open 120℃±5℃/Close 97℃ ±5℃ |
|
Manual operation: |
Declutching mechanism,with handwheel operation |
|
Self-locking device: |
Self-locking by worm and worm gear |
|
Space heater: |
30W (110/220V AC) Condensation preventing (according to conditions, can be adjusted) |
|
Conduit entry: |
Double seal 3×(PT3/4”、PT1”、PT1-1/2”optional) |
|
Ambient temperature: |
-25℃~+70℃(-30℃、-40℃、-60℃optional) |
|
Lubrication: |
Special oil for 00 actuators |
|
Material: |
Ductile iron, high-strength aluminum alloys, steel, aluminum bronze, polycarbonate |
|
Ambient humidity: |
Max 90%RH |
Non-Condensing |
Anti-vibration: |
X Y Z 10g,0.2~34 Hz,30 minutes |
|
External coating: |
Dry powder, epoxy polyester,high anti-corrosion |
|
Overload protection: |
Torque peak overload protection |
|
Display screen: |
LED display (smart regulation type) |
|
Setting mode: |
Non-intrusive setting (without opening the cover set type) |
|
Electrically: |
Integrated control unit with a non-invasive rotary switch |
Double sealing structure terminal box: Terminal box,which is double sealing and separated enclosure protection,assure the sealing integrity of the electronic component if open the box cover to make the on-site wiring.