> Products > Multi Turn Electric Actuator > High Speed Electric Multi Turn Actuator

Products

New Products

High Speed Electric Multi Turn Actuator

"AOX-M" series high speed electric multi turn actuator is a product developed by AOX in more than 20 years of manufacturing history and has been upgraded many times. "AOX-M" series electric actuators are used to control a variety of valves and other similar products, such as stop valves, gate valves, control valves, etc., which are widely used in petroleum, chemical, water treatment and other industries.

Send Inquiry PDF DownLoad

Product Description

High Speed Electric Multi Turn Actuator

Summary

"AOX-M" series High Speed Electric Multi Turn Actuator is a product developed by AOX in more than 20 years of manufacturing history and has been upgraded many times. "AOX-M" series electric actuators are used to control a variety of valves and other similar products, such as stop valves, gate valves, control valves, etc., which are widely used in petroleum, chemical, water treatment and other industries.

Product Introduction of the High Speed Electric Multi Turn Actuator

"AOX-M" series High Speed Electric Multi Turn Actuator mainly consists of the following parts: 1. Opening detection and feedback; 2. Shell: including shell and base; 3. Torque switch and limit switch; 4. Proportional control part: separate from the mechanical part for debugging; 5. Transmission mechanism: worm gear and clutch; 6. Driving part: the high-performance fully enclosed squirrel cage motor is used as the power source.

Product Parameter ( Specification )of the High Speed Electric Multi Turn Actuator

Torque Range:	40 - 1000 Nm Direct Output
Corrosion level:	Epoxy powder coating NEMA 4X corrosion protection is optional.
Explosion-proof level:	Exd IIC T5 design
Connection size:	ISO5210(Thrust torque type)and JB2920(Three claw type)
Working System:	On-off Type：S2 15 min, no more than 600 times per hour start.
Modulating Type:	S4 50 %, up to 600 triggers per hour
Applicable Voltage:	3 phase：AC 380 V (±10 %) /50/60 Hz (±5 %)
Shell:	Enclosure:IP67（IP68 optional）,NEMA4 and 6
Power:	Standard：380V AC/3ph Optional：110/220V AC/1ph,440V AC/3ph, 50/60Hz, ±10%
Torque switch:	1×Open/ Close, SPDT,250V AC 10A
Self-locking device:	Self-locking by worm and worm gear
Conduit entry:	Double seal 3×（PT3/4”、PT1”、PT1-1/2”optional）
Ambient temperature:	-25℃～+70℃（-30℃、-40℃、-60℃optional）
Lubrication:	Special oil for 00 actuators
Material:	Ductile iron, high-strength aluminum alloys, steel, aluminum bronze, polycarbonate
Setting mode:	Non-intrusive setting (without opening the cover set type)
Electrically:	Integrated control unit with a non-invasive rotary switch

Model	Output torque	Speed	Maxshaft diameter	Power	Rated current（A）50HZ	Flange	Weight
					three phases
	N·m	RPM	mm	W	380V	ISO5210	Kg
AOX-M-007	70	45	Φ28	400	2.42	F10	32
	70	90		400	2.95
AOX-M-010	120	35	Φ28	600	2.25	F10	38
	120	70		600	3.18
	120	105		800	5.15
AOX-M-020	300	34	Φ40	1100	4.50	F14	68
	300	67		1100	6.85
AOX-M-050	450	34	Φ40	1100	9.58	F14	70
	450	67		1500	14.80
AOX-M-060	600	34	Φ55	3000	10.89	F16	103
	600	67		4000	16.50
AOX-M-080	800	34	Φ55	3000	12.43	F16	103
	800	67		4000	23.50
AOX-M-100	1000	34	Φ55	4000	30.20	F16	103

Standard specification the High Speed Electric Multi Turn Actuator

Shell	Enclosure:IP67（IP68 optional）,NEMA4 and 6
Power	Standard：380V AC/3ph Optional：110/220V AC/1ph,440V AC/3ph, 50/60Hz, ±10%
Motor	Asynchronous motor
Limit switch	1×Open/ Close, SPDT,250V AC 10A（on/off model）
Auxiliary limit switch	1×Open/ Close, SPDT,250V AC 10A（on/off model）
Torque switch	1×Open/ Close, SPDT,250V AC 10A
Operating temperature	Internal-placed thermal protection，Open 120℃±5℃/Close 97℃ ±5℃
Manual operation	Declutching mechanism,with handwheel operation
Self-locking device	Self-locking by worm and worm gear
Space heater	30W (110/220V AC) Condensation preventing (according to conditions, can be adjusted)
Conduit entry	Double seal 3×（PT3/4”、PT1”、PT1-1/2”optional）

Production details of the High Speed Electric Multi Turn Actuator

Terminal box:In the terminal box with double seal protection design, when the terminal box cover is opened for field wiring, the separately sealed terminal box also ensures the sealing integrity of the electrical parts in the electric device.